Leave Your Message

How to Buy a Yongmao Used Tower Crane?

Buying a Yongmao Used Tower Crane can reduce capital costs, but the purchase needs more than a low asking price. KHL Group’s Yellow Table 2024 reported $243.4 billion in 2023 sales among the world’s 50 largest construction equipment manufacturers. That figure reflects a broad equipment market, not used tower-crane prices. It does show why buyers should compare a machine’s condition, age, and support needs with care.

Rental-market data adds useful context. The European Rental Association’s 2024 Market Report estimated European equipment rental revenue at about €29.3 billion for 2023. Rental growth can make ownership-versus-hire calculations important, especially when a crane may sit idle between projects. But broad market figures cannot tell you whether one specific Yongmao crane is a sound investment. That takes evidence.

Check the serial number, model, manufacturing year, operating records, and maintenance history. Inspect the mast sections, bolts, slewing system, hoist, electrical components, and climbing frame. Look closely for corrosion, repaired cracks, inconsistent paint, and worn sheaves. Ask for load-test records and manuals, then have a qualified crane professional assess the equipment against applicable requirements. A tidy cab is not proof of a healthy crane. Neither is a seller’s assurance. Still, even a detailed inspection has limits if records are missing or parts are difficult to source. This guide explains how to verify the crane, estimate refurbishment costs, assess seller claims, and compare the total cost with alternatives. The aim is not to promise a bargain. It is to help you make a documented decision before money changes hands.

How to Buy a Yongmao Used Tower Crane?

Define Required Capacity and Working Radius from the Yongmao Crane’s Load Chart

Before comparing used tower cranes, define the heaviest planned lift and its farthest working radius. Radius is measured horizontally from the tower’s centerline to the hook’s load line, not to the load’s edge. Include the load, rigging, lifting beam, and attachments in your weight estimate. Small items add up.

Use the load chart for the exact crane model and configuration. Capacity can change with jib length, reeving, and working radius. Find the chart rating at your required radius, then check that it covers the complete suspended load. Do not rely on the crane’s maximum-capacity figure; that rating may apply only at a short radius. Check the chart’s notes and confirm which components are included in its rated capacity.

For a used crane, match the chart to the machine’s identification plate and installed configuration. Ask for readable chart documentation, and have a qualified crane professional verify the proposed lift plan. Leave a practical margin for weight uncertainty and site conditions, including wind limits. A tidy estimate can still miss a lifting beam or an awkward hook position. Recheck the numbers before purchase, especially if the planned radius sits close to a chart limit.

Define Required Capacity and Working Radius

Illustrative lifting-capacity profile by working radius. These example values are not a manufacturer load chart; confirm capacity against the exact crane configuration and its certified load chart before purchase or lifting.

Verify Model, Serial Number, Configuration, and Compliance with EN 14439

Before buying a used tower crane, match its model and serial number across the nameplate, delivery records, inspection files, and component markings. A mismatch is a stop sign, not a clerical detail. Record the mast sections, jib length, counterweights, tie-in arrangement, hook height, and reeving. These details determine which load chart applies. Ask for the manufacturer’s original configuration documents and a change history; undocumented alterations need independent engineering review.

Check the crane’s declared compliance basis against EN 14439, which sets safety requirements for tower cranes. Confirm that the available manuals, inspection records, and conformity documents match the crane’s actual configuration and the rules at its intended site. The ILO estimates that construction accounts for about one in five work-related deaths worldwide, underscoring why traceable inspection records matter. Paperwork can look complete. It can still be wrong. Have a competent crane inspector verify identity, structural condition, safety devices, and operating limits before purchase.

Tips: Photograph every plate and joint marking. Compare load charts with the exact jib and ballast setup. If a serial number is unreadable, pause the transaction and obtain written verification from a qualified source.

Check Maintenance History and the 12-Month Examination Record Where LOLER Applies

When assessing a used tower crane, ask for its full maintenance history, not just the latest service sheet. Match the crane’s serial number and major component records across every document. Look for dated entries covering hoist ropes, brakes, slewing systems, climbing equipment, and structural repairs. Check whether reported defects were repaired and signed off. A neat folder is useful, but gaps still matter.

Where UK LOLER applies, check the thorough examination report and confirm that the next examination is due within the stated interval. For lifting equipment, examinations are generally required at least every 12 months, unless a competent person’s written scheme sets another interval. Different periods can apply to lifting accessories or equipment used to lift people. Verify the report identifies the exact crane configuration, examiner, date, findings, and any restrictions. Do not assume a service record replaces a thorough examination.

Compare the report with the crane on site. Check that installed sections, tie-ins, and key attachments match the records, and ask for evidence that urgent defects were closed. Paperwork can look tidy. The details may not. If an examination is overdue, incomplete, or unclear, pause the purchase and obtain an independent review before relying on the crane.

Inspect Structural Sections, Hoist, Slewing Unit, and Wire Ropes Against OEM Limits

How to Buy a Yongmao Used Tower Crane?

Inspect structural sections in good light, with dirt and loose paint removed from critical areas. Look closely at chord welds, splice plates, bolt holes, and tower faces for cracks, distortion, heavy corrosion, or fresh coating that may hide repairs. Measure dimensions and alignment where practical, then compare findings with the original equipment manufacturer’s limits for that exact model and configuration. A clean surface is not proof of sound steel.

Check the hoist under controlled conditions. Listen for irregular gear noise, inspect the drum grooves and rope anchorage, and confirm that the brake holds as specified. Review maintenance records and request documented test results; a brief powered demonstration cannot establish the condition of every component. Small doubts matter. Have a qualified technician verify any readings against the manual, not a generic tolerance chart.

Inspect the slewing unit for abnormal backlash, damaged teeth, loose fasteners, leaks, and rough movement. Examine the bearing area and confirm that bolt condition and tightening records meet OEM requirements. Measure wire-rope diameter at several points, and look for broken wires, flattening, corrosion, kinks, or birdcaging. Apply the manufacturer’s discard criteria; visual judgment alone can miss internal damage. Record each defect with photographs and measurements. If the correct limits or crane records are missing, pause the purchase decision until they are verified. That delay can feel excessive, but guessing is worse.

How to Buy a Yongmao Used Tower Crane? - Inspect Structural Sections, Hoist, Slewing Unit, and Wire Ropes Against OEM Limits

Inspection Area What to Check Evidence or Measurement Acceptance Basis Buyer Action if Unsatisfactory
Crane identity and records Confirm the exact model, serial number, configuration, capacity charts, service history, and applicable manuals. Compare the identification plate and component markings with the manuals, inspection records, and configuration drawings. Records must match the crane as assembled. Use the correct manual and limits for the exact model and configuration. Pause the purchase until identity, configuration, and essential records are verified.
Mast and structural sections Inspect chords, diagonals, joints, splice plates, pins, and connecting surfaces for cracks, bends, corrosion, impact damage, or unauthorized repairs. Clean suspect areas; record section identification and dimensions. Have a qualified inspector assess suspected cracks or repairs, using suitable non-destructive testing where needed. No cracks or unapproved structural repairs. Deformation, corrosion loss, and dimensional variation must be within the applicable OEM limits and local requirements. Do not accept a cracked or materially deformed section without an OEM-approved repair or replacement plan and qualified assessment.
Structural bolts, pins, and connections Check for missing, loose, damaged, mismatched, or improperly secured fasteners; inspect pin retainers and joint fit. Verify fastener type and installation against the assembly instructions. Check tightening or preload only by the specified procedure. Fastener grade, condition, installation, and tightening must meet the OEM instructions. There is no universal torque value for all crane joints. Replace incorrect or damaged parts with specified components; have joints reassembled and verified by qualified personnel.
Mast alignment and foundation interface Check mast plumb, base frame, anchorage, foundation interface, and any tie-in or climbing arrangement. Measure alignment using a suitable survey method; review foundation and tie-in records and inspect for movement, cracking, or corrosion. Alignment and foundation or tie-in condition must comply with the crane manual, approved erection design, and applicable local rules. Obtain a qualified engineering assessment before erection or operation if alignment, anchorage, or foundation condition is uncertain.
Hoist motor, gearbox, and brake Inspect for oil leaks, abnormal noise, overheating evidence, damaged mounts, worn couplings, and brake wear or contamination. Review maintenance records; inspect lubricant condition and levels as specified; function-test the brake and hoist under an approved procedure. Operation, brake condition, clearances, and lubricant requirements must meet the OEM specifications and applicable inspection rules. Require repair and documented re-testing before purchase acceptance if the brake slips, components are damaged, or operation is abnormal.
Hoist drum and reeving Check drum grooves, flanges, rope anchorage, fleet angle, reeving arrangement, and the condition of sheaves and guards. Compare reeving with the approved configuration diagram; inspect grooves and rope seating through the working range. Rope must be correctly reeved and anchored; drum and sheaves must be serviceable and compatible with the specified rope. Correct the reeving or replace damaged components before any load test or operation.
Wire ropes Inspect accessible rope length for broken wires, corrosion, kinks, crushing, birdcaging, heat damage, abrasion, and diameter reduction. Record rope construction, diameter, condition, and defects by location. Inspect and assess using the applicable rope inspection standard and OEM instructions. Removal criteria depend on rope construction, lay, application, and defect type; apply the relevant OEM limits and applicable edition of ISO 4309 or local rules. Do not use a single universal broken-wire threshold. Replace rope if a discard criterion is met or its history and condition cannot be reliably established; document the replacement specification.
Sheaves and rope guides Check sheave grooves, bearings, guards, alignment, and free rotation; look for sharp edges or uneven wear that can damage rope. Inspect groove profile and bearing condition against the specified rope and component limits; rotate and examine where safe. Groove wear, alignment, and bearing condition must remain within the component manufacturer’s limits. Replace or repair out-of-limit sheaves, bearings, or guards before operating with the rope under load.
Slewing unit and bearing Inspect the slewing bearing, mounting bolts, gear teeth, lubrication points, drive units, and brake operation for looseness, damage, leakage, or abnormal noise. Review maintenance records; check backlash, bolt condition, and bearing movement using the OEM procedure and measurement method. Backlash, bolt tightening, lubrication, and bearing movement must meet the specifications for the exact slewing system. Request specialist inspection if there is abnormal movement, damaged teeth, loose fasteners, or evidence of bearing deterioration.
Trolley, luffing, and travel systems Where fitted, inspect trolley or luffing drives, wheels, rails, ropes, brakes, stops, and travel limit devices. Compare components with the crane configuration; function-test movement and limits using the approved inspection procedure. Correct configuration and operation are required; adjustment and wear limits come from the applicable OEM documentation. Repair faults and verify limit-device operation before the crane is returned to service.
Electrical system and controls Inspect cables, connectors, enclosures, pendant or cab controls, grounding, and evidence of water ingress, overheating, or unauthorized modifications. Review electrical diagrams; have a qualified person test protective devices and functions appropriate to the crane and local rules. Electrical installation and controls must match the approved design and applicable electrical and machinery requirements. Require correction and documented verification of damaged wiring, bypassed protection, or undocumented modifications.
Safety devices Check applicable overload or load-moment protection, hoist and trolley limits, emergency stop, anemometer, and audible or visual warnings. Function-test each fitted device using the manufacturer’s procedure; review calibration or test records where applicable. All required devices must be present, correctly configured, and functional under the applicable OEM and local requirements. Do not operate with required devices missing, bypassed, or unverified; arrange repair and testing by qualified personnel.
Integrated inspection and load testing After assembly or major repair, assess the complete crane, including structure, mechanisms, controls, and safety devices. Obtain a report from a competent, qualified inspector; perform any required functional or load test under an approved test plan. Testing must follow the crane manual and applicable regulations. Test loads and procedures are not universal and must not be improvised. Make final purchase acceptance conditional on satisfactory inspection and required test documentation.

Calculate Total Cost for Purchase, Transport, Erection, Testing, and Certification

Buying a used tower crane starts with more than the asking price. Request its service records, inspection reports, and a detailed list of included parts. Check the mast sections, slewing system, hoist ropes, and electrical controls against the records. Missing components can turn a low purchase price into a costly repair project. Get an independent inspection before agreeing on a final figure.

Build a landed-cost estimate with separate lines for purchase, loading, transport, unloading, and site access. Oversized loads may need route surveys, escorts, or special lifting equipment, depending on local requirements. Ask carriers for written quotes based on the crane’s actual dimensions and delivery location. Allow for storage if the site is not ready. It adds up.

Erection costs depend on crew rates, foundation readiness, assembly equipment, and the crane’s configuration. Include commissioning tests, inspection by qualified professionals, and any required certification or documentation. Confirm who pays if a test identifies defects, and whether repairs delay handover. Keep a contingency for worn parts or schedule changes. It may be wrong. Compare the complete installed-and-approved cost, not just the seller’s number, before committing.